The accuracy of ultrasonic mechanical amplitude oscillation measurement by eddy-current technique

Article Sidebar

PDF (Українська)
Published: May 15, 2013
DOI: https://doi.org/10.20535/2312-1807.2013.18.1.187952
Keywords:
Eddy-Current probe, measurement of vibration parameters, square pancake

Main Article Content

O. F. Zakrevskyi
National technical university of Ukraine "Igor Sikorsky Kyiv polytechnic institute"

Abstract

There are theoretical researches of multilayer printed circuit board technological parameters influence on the accuracy of measurement devices, as this process is used to produce an Eddy-Current sensor with selfcalibration feature, which appears in the measurement device. It is shown that the accuracy of technological process determines the accuracy of the eddy-current measurement device calibration characteristic, which determines the accuracy of the device all in all. It must be taken into account when sensor and measurement device are designing by choosing measurement scheme of the measurement device correctly.

References 6, figures 3.

Article Details

How to Cite
Zakrevskyi, O. F. (2013). The accuracy of ultrasonic mechanical amplitude oscillation measurement by eddy-current technique. Electronics and Communications, 18(1), 89–93. https://doi.org/10.20535/2312-1807.2013.18.1.187952
Issue
Vol. 18 No. 1 (2013)
Section
Acoustical devices and systems
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

References

Zakrevskyi O.F. (2012), [Ultrasonic mechanical amplitude oscillation measurement (Overview)]. Electronics and Communication (ISSN 1811-4512). No 2(67), pp. 41-50. (Ukr)

Zakrevskyi O.F. (2011), [Eddy-Current Technique for control objects parameters measurement]. Electronics and Communication (ISSN 1811-4512). – no 6(65), pp. 11-15. (Rus)

Zakrevskyi O.F. (2012), [Influence of stuff magnetic features on cylindrical control objects ultrasonic mechanical oscillation measurement by Eddy-Current Technique]. Bulletin of National Technical University of Ukraine “Kyiv Polytechnic Institute” Series – Instrument Making (ISSN 0321-2211). no 43, pp. 87-94 (Ukr).

Movchanuk A.V., Zakrevskyi O.F. (2012), [Variation method usage to Eddy-Current measurement of vibration parameters]. Journal of the Sevastopol National Technical University. Series: Automation of Processes and Control. No 125, pp. 23-27 (Rus)

Sviridova A.P., Volosatov V.A. (1969), [Ultrasonic processing of radio components]. «Energia» L., P.120. (Rus)

Holopov Yu. V. (1988), [Ultrasonic welding of plastics and metals]. L.: Mashinostroienie. Leningr. department. P. 224. ISBN 5-217-00270-0 (Rus)