The Frequency Converter Output Voltage Control with Motor Current Minimum Tracing

Article Sidebar

pdf
Published: Mar 28, 2011
DOI: https://doi.org/10.20535/2312-1807.2011.16.1.273941
Keywords:
AC induction motor, motor current, supply voltage amplitude, real time control, frequency converter, observation of current amplitude

Main Article Content

A. Baskys
V. Bleizgys
A. Platakis
T. Lipinskis
A. Lucinskis

Abstract

The new method of frequency converter output voltage amplitude control based on the tracing of minimum value of AC induction motor phase current amplitude has been proposed. The voltage amplitude is controlled in real time in such a way that for a given instant motor load and speed the phase current amplitude would be minimal, i.e. the efficiency of the motor would be maximal. The realization of the developed method is less complicated comparing to vector control. It can be applied in the situations when motor load changes randomly and the fast response of the motor supply voltage amplitude is not needed.

Article Details

How to Cite
Baskys, A. ., Bleizgys , V. ., Platakis, A. ., Lipinskis , T. ., & Lucinskis , A. . (2011). The Frequency Converter Output Voltage Control with Motor Current Minimum Tracing. Electronics and Communications, 16(1), 63–66. https://doi.org/10.20535/2312-1807.2011.16.1.273941
Issue
Vol. 16 No. 1 (2011)
Section
Theory of signals and systems
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

References

M. Kazmierkowski, P. Krishnan, and F. Blaabjerg, Control in Power Electronics. Selected Problems, Elsevier Science, 2002, p. 62.

A. Baskys, V. Bleizgys, and V. Gobis, “The impact of output voltage modulation strategies on power losses in inverter”, Electronics and Electrical Engineering, vol. 94, no. 6, pp. 47–50, 2009.

D. Neacsu, “pace Vector Modulation”, in Proceedings of the 27th Annual IEEE Industrial Electronics Society Conference, pp. 1583–1592.

R. Valentine, Motor Control Electronics Handbook, McGraw-Hill, 1998, p. 754.

A. Mehrizi-Sani, S. Filizadeh, and P. Wilson, “Harmonic and Loss Analysis of Space-Vector Modulated Converters”, in Proceedings of the Int. Conference on Power Systems Transients IPST’07, pp. 1–6.

S. Grouni, R. Ibtiouen, M. Kidouche, and O. Touhami, “Real Time Rotor Flux Estimation for Induction Machine Drives: an Experimental Approach”, Electronics and Electrical Engineering, vol. 104, no. 8, pp. 69–72, Jan. 2010.

V. Bleizgys and A. Baskys, “The Influence of Supply Voltage Amplitude Variation Law on AC Induction Motor Efficiency in Variable-Speed Drive”, Solid State Phenomena, vol. 164, pp. 1–4, Jun. 2010. DOI:10.4028/www.scientific.net/SSP.164.1

C. Aghion, O. Ursaru, and M. Lucanu, “Three-Phase Motor Control using Modified Reference Wave”, Electronics and Electrical Engineering, vol. 99, no. 3, pp. 35–38, 2010.