Converter Frequency Response Calculation electromagnetic type in the mode of registration of ultrasonic waves in sheet non-ferromagnetic rolled metal

Main Article Content

O.M. Petryshchev
M.I. Boltychov
G.M. Suchkov

Abstract

In this paper, for the first time the frequency response of the electromagnetic type transducer with the alternating magnetic field detector in the shape of a plane circular coil is plotted and analyzed. It is established that the detector’s electrical circuit size extension causes the narrowing of the transducer’s work frequency range and its displacement towards the low frequencies. It is shown that the skin effect decreases the sensitivity of the transducer practically by two orders in all work frequency range

Article Details

How to Cite
Petryshchev, O. ., Boltychov, M. ., & Suchkov, G. . (2010). Converter Frequency Response Calculation electromagnetic type in the mode of registration of ultrasonic waves in sheet non-ferromagnetic rolled metal. Electronics and Communications, 15(5), 197–205. https://doi.org/10.20535/2312-1807.2010.58.5.285231
Section
Acoustical devices and systems

References

M. Boltychev, O. Petrishchev, and G. Suchkov, Principles of constructing mathematical models of electromagnetic converters type in ultrasonic recording mode waves

V. Grinchenko and V. Meleshko, Harmonic vibrations and waves in elastic bodies, Kyiv: Naukova Dumka, 1981, p. 283.

G. Bateman and A. Erdelyi, Higher transcendental functions. Bessel functions, parabolic cylinder functions, orthogonal polynomials, Moscow: Science, 1974, p. 296.

N. Koshlyakov, E. Gliner, and M. Smirnov, Partial differential equations of mathematical physics, Moscow: Vysshaya shkola, 1970, p. 710.

M. Abramovich and I. Stigan, Special Functions Reference withformulas, graphs and mathematicaltables, Moscow: Nauka, 1979, p. 832.