Increasing the load capacity of the operational amplifier

Main Article Content

Леонид Николаевич Павлов

Abstract

Reason instability in local area of mass application opamp is investigated. It is marked that the tradition analyse of stability does not embrace plenitude of problem. It has been established that the cause of local instability consists in a nonlinear dependence of the capacitance -voltage transistors of the current operating point , so the analysis phase margin at the initial operating point is insufficient. For a decision the set problem numeral methods analysis of instability are used. Solution of task is offered due to the increase of volume of analysis of frequency and phase descriptions with verification by a time domain analyse.

References 3, figures 12.

Article Details

How to Cite
Павлов, Л. Н. (2015). Increasing the load capacity of the operational amplifier. Electronics and Communications, 20(3), 23. https://doi.org/10.20535/2312-1807.2015.20.3.53590
Section
Solid-state electronics

References

Pavlov, L. N., Kalnibolotski, Y. M. (2011). Opamp optimization. Electronics and Communications, No.1, Pp.59-62. (Rus)

LESHAN RADIO COMPANY, LTD. LR4558. DATASHEET 22.04.2006. Two high performance opera-tional amplifiers.

Sze, S. M. and Kwok, K. Ng. (2007). Physics of Semiconductor Devices, Third Edition. A JOHN WILEY & SONS, JNC., PUBLICATION. ISBN-I 3: 978-0-47 1-1 4323-9, ISBN-10: 0-471-14323-5, P. 763.